• VK
  • DZEN
  • INSTAGRAM
445009, Samara region, mountains. Tolyatti st.
Novozavodskaya 2a, building 309

IPR 535 - 216 - A - HORIZON VZ

IPR 535 - 216 - A - HORIZON VZ
Price on request
Equipment:
  • Request a price from the manager
You choosed:
    Explosion protection marking PO Ex ia I Ma / 0Ex ia IIC T6 Ga X / Ex ia IIIC 850C Da X
    I.S. parameter labeling LI: 1 µH, CI: 30 pF, UI: 27 V, II: 25 mA, PI: 0.8 W
    Degree of protection of the shell IP67
    Operating temperature -60°C<Ta<70°C
    Climatic performance  
    Supply voltage 8-28V
    Current consumption in standby mode, no more 80uA
    Own current consumption in the "Fire" mode, no more 0.7mA
    Maximum current of the external additional resistor circuit, not more than 100mA
    Case color: red
    Housing material High impact polyamide
    Dimensions without cable entries 134x108x46mm

    Selection table for additional resistors

    FACP type Connection options
    Parallel connection (make) Sequential connection (on opening)
    LB-07 Rd must ensure current consumption> 15 mA, Rd \u003d 11 kOhm, Rok \u003d 2 kOhm, VDok \u003d KD522.
    Rok \u003d 2 kOhm, VDok \u003d KD522.
    Ray Rd = 2.4 kOhm, Rok = 2.4 kOhm, VDok = KD521A. Rd = 2.2 kOhm, Rok = 2.4 kOhm, VDok = KD521A.
    PPK-2 Rd = 1.2 kOhm, Rok = 3.6 kOhm, VDok = KD521A. Rd = 10.0 kOhm, Rok = 3.6 kOhm, VDok = KD521A.
    Bolide Rd \u003d 1.5 kOhm (3.0 kOhm - to determine double drawdown), Rd \u003d 8.2 kOhm (4.7 kOhm - to determine double drawdown),
    Rok \u003d 4.7 kOhm, do not install VDok Rok \u003d 4.7 kOhm, do not install VDok
    Yakhont-16i Rd \u003d 1.8 kOhm (4.0 kOhm - to determine double drawdown), Not applicable
    Rok = 8.2 kOhm, do not set VDok
    WERS Rd \u003d 820 Ohm (1.8 kOhm - to determine double drawdown), Rd \u003d 10 kOhm (4.7 kOhm - to determine double drawdown),
    Rok = 7.5 kOhm, do not set VDok Rok = 7.5 kOhm. Do not install VDoc

     

    AM - indicates the presence of a product modification with an address label.

    The IPR535 detector Horizont VZ is supplied with cable glands of various designs:

    • for open laying of the attached cable (index in the designation - K );
    • for laying the attached cable in the pipe G1/2 ( T-1/2 );
    • for laying the attached cable in the pipe G3/4 ( T-3/4 );
    • for connecting an armored cable ( B );
    • for connecting a cable in a metal hose RZTSH-15mm or 20mm ( KM15, KM20 ).


    The IPR535 detector Horizont VZ is supplied with two cable glands, which allow the detector to be installed in an alarm loop with a round cable with a diameter of 6-10mm.