Enclosures Series - S models: SC, SI, SL, ST, SX, SCX, SIX, SLX, STX, SXX, SZ and SZX are flameproof enclosures and comply with Directive 2014/34/EU, EN 60079-0:2012/A11 :2013 have the type of protection "d" according to EN 60079-1:2014 and "t" according to EN 60079-31:2014, intended for the installation of electrical equipment in places with a risk of explosive atmosphere.Shells can have different configuration options.Enclosures provide reliable protection against external influences.The presented sheaths are the best solution for disconnecting and laying cables.On the outer surface of the shell, cable entries, plugs, drainage devices, etc.P.
Explosion-proof enclosures differ in case design, overall dimensions, case material and the number of holes for cable laying and its subsequent disconnection.
Equipment mounted on the basis of the presented explosion-proof enclosures allows it to be classified as electrical equipment of groups I, II and III, belongs to the category M 2 (mining version), 2G (gas environments), 3D (field environments).Equipment can be placed in zones 2, 3, 21 and 22.The environment may contain explosive mixtures of gases and vapors with air of category IIA, IIB and IIC, as well as IIIA (combustible flying particles), IIIB (non-conductive dust) and IIIC (conductive dust).
The shells are made of the following materials: models SC, SI, SL, ST, SX and SZ - copper-free aluminum alloy, SCX, SIX, SLX, STX, SXX and SZX - stainless steel.According to the manufacturing technology, the shells are divided into cast and welded.
Finished equipment based on shells can correspond to the following temperature class: T6, T5, T4, T3.When choosing a temperature class, consider the power dissipation of the enclosure, the operating temperature and the equipment used as accessories.
When mounting electrical equipment inside the shells, the following conditions must be observed that at least 40% of the cross-sectional area of \u200b\u200bthe shell remains free, for the unhindered flow of the gas flow, so as not to limit the development of the explosion.
| Application area | Material | Name of shells | Ex marking according to EN 60079-0:2012/A11:2013 |
| For group II and III | copper-free aluminum alloy; stainless steel. | SC, SI, SL, ST, SX, SZ; SCX, SLX, STX, SXX, SZX. |
|
For group I and III | stainless steel | SCX, SIX, SLX, STX, SXX, SZX. |
|
| SC, SI, SL, ST, SX, SZ; SCX, SIX, SLX, STX, SXX, SZX. | ||
| Housing material | Copper-free aluminum alloy; Stainless steel. | |
| Ex marking |  II 2 G Ex db IIC T6, T5, T4 or T3 Gb; III 2 D Ex tb IIIC T80°C, T95°C, T130°C or T190°C Db. | |
| Degree of protection of a cover, IP | IP66/67 | |
| Climatic performance | F or NF or MU | |
| Operating temperature | Т6 - from -60°C to +80°C Т5 - from -60°C to +95°C Т4 - from -60°C to +130°C Т3 - from -60°C to +180°C | |
| Switched current, A - alternating current, no more - direct current, no more | 150 750 | |
| Switched voltage, V - alternating current, no more - direct current, no more | 150 750 | |
| Overall dimensions of shells, no more than, mm | SC, SI, SL, ST, SX | SCX, SIX, SLX, STX, SXX |
| Ø100 x 59mm - code in designation 101006 Ø100 x 93mm - code in designation 101009 | Ø100 x 62mm - code in designation 101006 Ø100 x 96mm - code in designation 101009 | |
| SZ | SZX | |
| Ø 110 x 69mm - code in designation 111106 Ø 110 x 98mm - code in designation 111109 Ø 110 x 158mm - code in designation 111115 Ø 150 x 69mm - code in designation 151507 Ø 150 x 119mm - code in designation 151511 Ø 150 x 139mm - code in designation 151513 Ø 175 x 69mm - code in designation 171707 Ø 175 x 119mm - code in designation 171711 Ø 175 x 139mm - code in designation 171713 Ø 175 x 168mm - code in designation 171716 | ||
| SCX, SIX, SLX, STX, SXX, SZX. | ||
| Housing material | Stainless steel | |
| Ex marking | IM 2 Ex db I Mb; III 2 D Ex tb IIIC T80°C, T95°C, T130°C or T190°C Db. | |
| Degree of protection of a cover, IP | IP66/67 | |
| Climatic performance | F or NF or MU | |
| Operating temperature | Т6 - from -60°C to +80°C Т5 - from -60°C to +95°C Т4 - from -60°C to +130°C Т3 - from -60°C to +180°C | |
| Switched current, A - alternating current, no more - direct current, no more | 150 750 | |
| Switched voltage, V - alternating current, no more - direct current, no more | 150 750 | |
| Overall dimensions of shells, no more than, mm | SCX, SIX, SLX, STX, SXX | SZX |
| Ø100 x 62mm - code in designation 101006 Ø100 x 96mm - code in designation 101009 | Ø 110 x 69mm - code in designation 111106 Ø 110 x 98mm - code in designation 111109 Ø 110 x 158mm - code in designation 111115 Ø 150 x 69mm - code in designation 151507 Ø 150 x 119mm - code in designation 151511 Ø 150 x 139mm - code in designation 151513 Ø 175 x 69mm - code in designation 171707 Ø 175 x 119mm - code in designation 171711 Ø 175 x 139mm - code in designation 171713 Ø 175 x 168mm - code in designation 171716 | |
Designation when ordering.
| SL | X | - X 1 X 2 … X n |
| one | 2 | 3 |
Enclosure Series: SLX - 101006.
model - SC
model - SL
model - SI
model - ST
model - SX
Rice. 1a. General view of SC, SI, SL, ST, SX enclosures in an aluminum alloy housing with options for the location of threaded holes for cable glands.
model - SCX
model - SIX
model - SLX
model - STX
model - SXX
Rice. 1b. General view of SCX, SIX, SLX, STX, SXX enclosures in a stainless steel case with options for the location of threaded holes for cable glands.
Option I
Option II
Option III
Option IV
Variant V
Option VI
Rice. Fig. 2. General view of SXX and SZX enclosures in an aluminum alloy or stainless steel housing with options for the location of threaded holes for cable glands.
II 2 G Ex db IIC T6, T5, T4, T3 Gb;