Combined fire detectors, stand-alone emergency luminaires in general industrial (street) design of the Sirius OP series
Fire detectors (boards) of the Sirius series are designed to alert people about a fire using a light information board and a sound signal.Autonomous emergency luminaires "Sirius" are designed to illuminate corridors and escape routes.
Annunciators and emergency luminaires are produced in versions differing in: body material; type of notification (light, sound); supply voltage; the presence of a backup power supply (Table 1).
Placards and emergency luminaires are manufactured in general industrial design and have a high degree of protection against environmental influences (IP67) and can be used outdoors in harsh climatic conditions.
Annunciators (Scoreboards) of the "Sirius OP" series
Table 1
Description | Designation | Supply voltage |
General industrial (street) light board | Sirius OP - X - C | = 10-27Vdc; ~ 176-250Vac; = 200-350dc; |
General industrial (street) light and sound board | Sirius OP - X - SZ12-24 | = 10-27Vdc; |
Sirius OP - X - SZ220 | ~ 176-250Vac; = 200-350dc; | |
General industrial (street) light board with backup power supply | Sirius OP - X - R | = 10-27Vdc; ~ 176-250Vac; = 200-350dc; |
X - designation of the body material (P, M, N).
Case material:
The board is completed with two explosion-proof cable glands of the KV series TU 3449-138-81888935-2016 manufactured by LLC Company SMD.Connecting thread of cable glands G1 / 2.Cable glands allow you to enter and exit cables with a circular cross-section with a diameter of 6-12 mm.
The panels are supplied with cable glands of various designs:
| Characteristic | Execution, mode | Meaning |
|---|---|---|
| Operating temperature | - | -60C<Ta<+70C |
| Sheath protection degree | - | IP67 |
| Supply voltage | -S, -SZ12-24 | D.C =10V - 27Vdc |
| -S, -SZ220 | Alternating current ~165-250Vac, or D.C =200-350Vdc | |
| Light channel consumption current, no more | D.C 10V - 27V | 500 mA |
AC 220Vac or constant 200-350Vdc | 50 mA | |
| Audio channel consumption current, no more | D.C 10V - 27V | 250 mA |
Alternating current ~220Vac or constant =200-350Vdc | 30 mA | |
| Operating modes | - | Separate power supply for light and sound warning; |
| Light notification modes | - | permanent; Intermittent with frequency 1 Hz or 2 Hz. |
| Sound Alert Modes | - | 1 - Horn, monophonic sound; 2 - Siren 1, frequency modulation 1 Hz; 3 – Trill, frequency modulation 7 Hz; 4 - Intermittent 2 Hz. |
| Maximum perceptible illumination of the scoreboard, no more | - | 1500 lx |
| Sound pressure level at a distance of 1 m, not less than | - | 105±5 dB |
| Frequency of generated audio signals | - | 1.5-3 kHz |
| Type of redundant power supply | -R, | Accumulator battery |
| Battery life, not less | -R, | 3 hour |
| Light source type | - | High Efficiency LEDs |
| Dimensions of the inscription, not less than | -S, -SZ12-24, -SZ220 | 350x120 mm |
| Housing material | - | Polyamide and polycarbonate; Steel 08, steel Art. 3; Stainless steel 12X18H10T |
| Overall dimensions, no more | Plastic case | 466x160x50 mm |
| Steel, stainless steel | 466x160x41 mm | |
| Weight, no more | -P (plastic body) | 3 kg |
| -M (steel) | 3.5 kg | |
| -H (stainless steel) | 3.5 kg |
The board is made with various inscriptions and pictograms, against a background of any color, at the request of the customer. Colors: red; green; blue; yellow; black; white. When ordering non-standard inscriptions or pictograms, the customer must provide text or a picture.
Designation when ordering
| Sirius OP | P | - C | TO | - l | FIRE color, background color |
| 1 | 2 | 3 | 4 | 5 | 6 |
1 - designation of a series of annunciator " Sirius OP " (general industrial street);
2 - case material:
" P " - plastic case (polyamide, polycarbonate);
" M " - steel case;
" H " - stainless steel body;
3 – notification type:
" C " - light board;
" SZ " - light and sound board;
" -P " - a panel with a backup power supply;
4 - type of cable glands:
" K " - for open cable laying;
" T1/2 ", " T3/4 " - for connecting a pipe with a G1/2 or G3/4 thread;
" B " - for an armored cable with an outer diameter of up to 18mm;
" KM10 ", " KM12 ", " KM15 ", " KM20 " - for metal hose 10mm - 20mm.
5 – arrangement of cable entries (view from the front side):
n - right (by default, you can not specify);
l - left;
6 - the text of the inscription or a pictogram, for example, "FIRE", "GO GAS GO" indicating the color of the inscription and background.
Downloads:
