Products

Select the parameters
			ПОДВЕСНЫЕ МОДУЛИ ГАЗОВОГО ПОЖАРОТУШЕНИЯ
ПОДВЕСНЫЕ МОДУЛИ ГАЗОВОГО ПОЖАРОТУШЕНИЯ ПОДВЕСНЫЕ МОДУЛИ ГАЗОВОГО ПОЖАРОТУШЕНИЯ
SUSPENDED GAS FIRE FIGHTING MODULES
Equipment
  • Request a price from the manager
You choosed:
  • Equipment

Special-purpose modules with a useful volume of 20 liters and 30 liters are intended for long-term storage and extinguishing of class A, B, C fires and electrical equipment under voltage with gas fire extinguishing agents (GFEA) (the voltage at which it is possible to extinguish without disconnecting the protected equipment must comply with the requirements of the NTD for GFEA).

They are used for fire protection of premises and equipment, in a modular design, for volumetric fire extinguishing. Structurally, the modules are metal vessels in the form of an ellipsoid. In the upper part of the vessels there is a metal fastening.

In the neck of the vessels there is a shut-off and starting device with an electromechanical actuator (hereinafter EMA), a pressure indicator (pressure gauge), a safety membrane and a pressure alarm (hereinafter SDU). The cylinders of the module are painted white.

The modules are not intended for use in hazardous areas.

The modules are manufactured in the climatic version "UHL", placement category 4 according to GOST 15150, for operation at ambient temperatures from -20 °C to plus 50 °C and relative humidity of no more than 80% at a temperature of 15 °C. The delivery set includes:

  • Gas fire extinguishing module assembled with ZPU;
  • Ceiling mount bracket (wall mount bracket - available on request);
  • Electromechanical starter (EMS) device;
  • Manometer;
  • Pressure alarm;
  • Passport combined with operating instructions;
  • Cylinder passport;
  • Standard cardboard packaging.

Peculiarities:

The special-purpose modules MGP-20 "SMD" and MGP-30 "SMD" use a locking and starting device (LSD) from Rotarex, which has three types of starting:

  • Main (automatic);
  • Manual;
  • Autonomous - due to the destruction of the ZPU thermal lock flask under the influence of a temperature exceeding 68˚C.

  

  1. The maximum working pressure of the module is 2.5 MPa - allows filling two types of flammable liquids: Khladon 125 and Khladon 227EA.
  2. The module has a greater margin of safety.
  3. The service life until the first re-examination of the cylinder is 15 years.
  4. When using a suspended module, the GOTV comes out practically without residue.
  5. Due to the suspended design, it allows you to save floor space.
  6. There are no costs for materials and installation work for piping.
  7. The module is a reusable device.

The manufacturer can make changes to the design of the module while maintaining its basic operating parameters.

Module parametersModule type
IHL - 20 “SMD” (25-20-20)IHL - 30 "SMD" (25-30-20)
Module volume, l20thirty
Working pressure MPa (kgf/ cm2 )2.5 (25.5)
Test pressure, MPa (kgf/ cm2 )3.75 (38.3)
Propellant gas pressure, MPa (kgf/cm 2 )1.6 (16.3)
Actuation pressure of the membrane safety device, MPa (kgf/cm 2 )3.4(34.7) ± 0.17
Type of purchased locking and starting device (BrandSys LLC, Yekaterinburg)ZPU "ROTAREX" 20/4.2 (M30x1.5)
Diameter of the nominal bore of the control unit, mm20
External diameter of the module, D, mm408±5
Height of assembled module, L, mm410±5488±5
Cylinder type100A.20.01100A.30.01
Cylinder body material.Carbon or alloy steel
Corrosion resistant steel
Thread in the neck of the cylinder, mmM30x1.5
Weight of the empty module, taking into account the spare parts, kg15.1±0.218.4±0.2
Release time of 95% GFTS by weight, s, no more10
Residue of GFFS, no more than % by weight of GFSF0.5
Operating temperature, °Cminus 20 °С to plus 50 °С
Service life before first re-examination, years15
Response resource, no less than times10
Electromechanical stimulator with a powder charge (Pusher PT-5, TU 7287-269-07513406-2008, Murom Instrument-Making Plant JSC)PT-5 (1 piece)
Electrical resistance, Ohm2÷4.5
PU network testing current, A, no more (within 5 minutes)0.05
Operation voltage, V6.0÷30
Operation current, A, not less0.5
Starting pulse supply time, s0.01±0.001
Refillable GOTVFreon-227ea, Freon-125, Novec 1230
Maximum fill factor, kg/l1.1 - (Freon-227ea);
0.9 - (Freon-125);
1,2 - (FK-5-1-12).
ATTENTION!
The PT-5 pusher is a single-use device. Cannot be disassembled, repaired or serviced.

The structure of the symbol must meet the following requirements:

IHL- XX" XXX "( XX-XX-XX )
123456

 

  1. - Gas fire extinguishing module;
  2. - Module type;
  3. - Brand name;
  4. - Operating pressure of the module, kgf/cm2;
  5. - Module capacity, l;
  6. - Diameter of the nominal bore of the shut-off and starting device, mm;

Example notation:

IHL - 20 “SMD” (25-20-20).

Contacts

  • SMD Company LLC
  • 445009, Samarskay obl.,
  • Togliatty,
  • st. Novozavodskaya 2a, build. 309
  • Аккредитация URS ISO 9001
Write to us, we are online!