Specifications

• IP 212 Trion OP is a detector of maximum action and can be used in short circuit alarm loops (parallel connection).The "Fire" alarm notification is provided by an abrupt decrease in the detector resistance.
• The detector has a built-in optical indication of actuation.
• To adjust to the Control Panel type, a replaceable current-limiting resistor is used.The alarm signal remains after the end of exposure to combustion products. The detector is returned to standby mode from the control panel.
• The IP 212 Trion OP detector is supplied with two cable glands that allow the detector to be installed in an alarm loop with a round cable 6-10mm in diameter

Downloads:

	TR EAEU 043/2017 - Certificate of the technical regulation of the Eurasian Economic Union "On the requirements for fire safety and fire extinguishing means"
	TR TS 020/2011 - Declaration of conformity with the technical regulations of the customs union "Electromagnetic compatibility of technical means"
	TR EAEU 037/2016 - Declaration of Conformity with the Technical Regulations of the Customs Union "On Restricting the Use of Hazardous Substances in Electrical and Radio Electronics Products"
	TR CU 004/2011 - Refusal decision of the technical regulation of the customs union "On the safety of low-voltage equipment" and TR TS 010/2011 - Refusal decision of the technical regulation of the customs union "On the safety of machinery and equipment"
	General industrial smoke detector IP212-116.6 "Trion OP". TU 26.30.50-116-81888935-2020. Manual. SMD 437100 117 000-01 RE.