Products

Select the parameters
УДП ИПР535 ГОРИЗОНТ ПУСК МК
УДП ИПР535 ГОРИЗОНТ ПУСК МК УДП ИПР535 ГОРИЗОНТ ПУСК МК УДП ИПР535 ГОРИЗОНТ ПУСК МК УДП ИПР535 ГОРИЗОНТ ПУСК МК УДП ИПР535 ГОРИЗОНТ ПУСК МК
UDP IPR535 HORIZONT PUSK MK
Price from: 83 USD
Type of protection
  • (0ExiaIIBT6Ga)
  • MK (1ExdIIBT6Gb)
You choosed:
  • Type of protection

  • Address label

  • Cable gland

Manual start device IPR 535 Horizon "Start" MK is designed to start the actuators of fire extinguishing systems, smoke removal, etc. Explosion protection marking 1Ex d IIB T6 Gb.Full compliance with the requirements of GOST 53325 as amended in 2012.

The detector can be used as a single element, as well as in alarm loops (AL) for closing (parallel connection) or opening (series connection). Two-color status indicator: standby mode indication - green flashes with a period of 5-7 seconds; indication of the "alarm" mode - blinking red with a frequency of more than 5 Hz.

Class according to GOST 53325-2012: manual detector - class A (activation by one action); manual start devices - class B (activation by two steps).

Manual start device IPR 535 Horizon "Start" is intended for starting the actuators of fire extinguishing systems, smoke removal, etc.The manual start device is intended for installation in hazardous areas of class 0 and below.

Explosion protection marking1Ex d IIB T6 Gb
Degree of protection of the shellIP67
Operating temperature-60°C<Ta<75°C
Climatic performanceUHL1
Supply voltage8-28V
Current consumption in standby mode, no more80uA
Own current consumption in the "Fire" mode, no more0.7mA
Maximum current of the external additional resistor circuit, no more100mA
Case color:yellow
Housing materialAluminium alloy
Dimensions without cable entries131x122x46mm

Selection table for additional resistors

FACP typeConnection options
Parallel connection (make)Sequential connection (on opening)
LB-07Rd must ensure current consumption> 15 mA,Rd \u003d 11 kOhm, Rok \u003d 2 kOhm, VDok \u003d KD522.
Rok \u003d 2 kOhm, VDok \u003d KD522.
RayRd = 2.4 kOhm, Rok = 2.4 kOhm, VDok = KD521A.Rd = 2.2 kOhm, Rok = 2.4 kOhm, VDok = KD521A.
PPK-2Rd = 1.2 kOhm, Rok = 3.6 kOhm, VDok = KD521A.Rd = 10.0 kOhm, Rok = 3.6 kOhm, VDok = KD521A.
fireballRd \u003d 1.5 kOhm (3.0 kOhm - to determine double drawdown),Rd \u003d 8.2 kOhm (4.7 kOhm - to determine double drawdown),
Rok \u003d 4.7 kOhm, do not install VDokRok \u003d 4.7 kOhm, do not install VDok
Yakhont-16iRd \u003d 1.8 kOhm (4.0 kOhm - to determine double drawdown),Not applicable
Rok = 8.2 kOhm, do not set VDok
WERSRd \u003d 820 Ohm (1.8 kOhm - to determine double drawdown),Rd \u003d 10 kOhm (4.7 kOhm - to determine double drawdown),
Rok = 7.5 kOhm, do not set VDokRok = 7.5 kOhm. Do not install VDoc

 

AM - indicates the presence of a product modification with an address label.

The IPR535 detector Horizont PUSK MK is supplied with cable glands of various designs:

  • for open laying of the attached cable (index in the designation - K );
  • for laying the attached cable in the pipe G1/2 ( T-1/2 );
  • for laying the attached cable in the pipe G3/4 ( T-3/4 );
  • for connecting an armored cable ( B );
  • for connecting a cable in a metal hose RZTSH-15mm or 20mm ( KM15, KM20 ).


The detector IPR535 Horizon PUSK is supplied with two cable glands, which allow the detector to be installed in an alarm loop with a round cable with a diameter of 6-10mm.

Contacts

  • SMD Company LLC
  • 445009, Samarskay obl.,
  • Togliatty,
  • st. Novozavodskaya 2a, build. 309
  • Аккредитация URS ISO 9001
Write to us, we are online!