Selection table for additional resistors

AM - indicates the presence of a product modification with an address label.

The detector IPR535 Horizon Emergency exit MK is supplied with cable glands of various designs:

• • for open laying of the attached cable (index in the designation - K );
  • for laying the attached cable in the pipe G1/2 ( T-1/2 );
  • for laying the attached cable in the pipe G3/4 ( T-3/4 );
  • for connecting an armored cable ( B );
  • for connecting a cable in a metal hose RZTSH-15mm or 20mm ( KM15, KM20 ).

The detector IPR535 Horizon Emergency exit MK is supplied with two cable glands, which allow you to install the detector in an alarm loop with a round cable with a diameter of 6-10mm.

Files for download:

	EAEU TR 043/2017 - Certificate of technical regulations of the Eurasian Economic Union "On requirements for fire safety and fire extinguishing means"
	TR TS 012/2011 - Certificate of technical regulations of the Eurasian Economic Union "On the safety of equipment for work in explosive environments"
	GOST 30546 - "Seismic Resistance Certificate" IPR 535 Horizon
	TR CU 020/2011 - Declaration of conformity of the technical regulations of the customs union "Electromagnetic compatibility of technical means"
	TR CU 004/2011 - Refusal decision of the technical regulations of the customs union "On the safety of low-voltage equipment" and TR CU 010/2011 - Refusal decision of the technical regulations of the customs union "On the safety of machinery and equipment"
	EAEU TR 037/2016 - Refusal decision of the technical regulations of the customs union "On limiting the use of hazardous substances in electrical and radio electronics products"
	Manual fire detectors, explosion-proof, addressable and non-addressable series - IPR 535 - 201.1 - Horizon MK-AM. Explosion-proof, addressable and non-addressable remote start devices UDP 535 Gorizont MK series