IPR 535 Horizon "Emergency exit" MK is designed to unblock emergency exits.Explosion protection marking 1Ex d IIB T6 Gb.
IPR 535 Horizon "Emergency exit" is designed to unblock emergency exits and is intended for installation in hazardous zones of class 0 and below.
| IPR535 Horizon EXIT MK | IPR535 Horizon EXIT | |
| Explosion protection marking | 1Ex d IIB T6 Gb | 0Ex ia IIB T6 Ga |
| Marking of microprotection parameters | LI: 1 µH, CI: 30 pF, UI: 27 V, II: 25 mA, PI: 0.8 W | |
| Degree of protection of the shell | IP67 | IP67 |
| Operating temperature | -60C<Ta<75C | -60C<Ta<70C |
| Climatic performance | UHL1 | |
| Supply voltage | 8-28V | 8-28V |
| Current consumption in standby mode, no more | 80uA | 80uA |
| Own current consumption in the "Fire" mode, no more | 0.7mA | 0.7mA |
| Maximum current of the external additional resistor circuit, no more | 100mA | 100mA |
| Case color: | green | green |
| Housing material | Aluminium alloy | High impact polyamide |
| Dimensions without cable entries | 131x122x46mm | 134x108x46mm |
| FACP type | Connection options | |
| Parallel connection (make) | Sequential connection (on opening) | |
| LB-07 | Rd must ensure current consumption> 15 mA, | Rd \u003d 11 kOhm, Rok \u003d 2 kOhm, VDok \u003d KD522. |
| Rok \u003d 2 kOhm, VDok \u003d KD522. | ||
| Ray | Rd = 2.4 kOhm, Rok = 2.4 kOhm, VDok = KD521A. | Rd = 2.2 kOhm, Rok = 2.4 kOhm, VDok = KD521A. |
| PPK-2 | Rd = 1.2 kOhm, Rok = 3.6 kOhm, VDok = KD521A. | Rd = 10.0 kOhm, Rok = 3.6 kOhm, VDok = KD521A. |
| fireball | Rd \u003d 1.5 kOhm (3.0 kOhm - to determine double drawdown), | Rd \u003d 8.2 kOhm (4.7 kOhm - to determine double drawdown), |
| Rok \u003d 4.7 kOhm, do not install VDok | Rok \u003d 4.7 kOhm, do not install VDok | |
| Yakhont-16i | Rd \u003d 1.8 kOhm (4.0 kOhm - to determine double drawdown), | Not applicable |
| Rok = 8.2 kOhm, do not set VDok | ||
| WERS | Rd \u003d 820 Ohm (1.8 kOhm - to determine double drawdown), | Rd \u003d 10 kOhm (4.7 kOhm - to determine double drawdown), |
| Rok = 7.5 kOhm, do not set VDok | Rok = 7.5 kOhm. Do not install VDoc | |
AM - indicates the presence of a product modification with an address label.
The IPR535 detector Horizont PUSK MK is supplied with cable glands of various designs:
The detector IPR535 Horizon PUSK is supplied with two cable glands, which allow the detector to be installed in an alarm loop with a round cable with a diameter of 6-10mm.
Downloads:
