Products

Select the parameters
УДП 535 – 216.9 – В – ГОРИЗОНТ «ПУСК» ВЗ-АМ
УДП 535 – 216.9 – В – ГОРИЗОНТ «ПУСК» ВЗ-АМ УДП 535 – 216.9 – В – ГОРИЗОНТ «ПУСК» ВЗ-АМ УДП 535 – 216.9 – В – ГОРИЗОНТ «ПУСК» ВЗ-АМ
UDP 535 - 216.9 - V - HORIZON "START" VZ-AM
Equipment
  • Request a price from the manager
You choosed:
  • Equipment

Explosion protection markingPO Ex ia I Ma / 0Ex ia IIC T6 Ga X / Ex ia IIIC 850C Da X
Marking of microprotection parametersLI: 1 µH, CI: 30 pF, UI: 27 V, II: 25 mA, PI: 0.8 W
Degree of protection of the shellIP67
Operating temperature-60°C<Ta<70°C
Climatic performance 
Supply voltage8-28V
Current consumption in standby mode, no more80uA
Own current consumption in the "Fire" mode, no more0.7mA
Maximum current of the external additional resistor circuit, not more than100mA
Case color:yellow
Housing materialHigh impact polyamide
Dimensions without cable entries134x108x46mm

Selection table for additional resistors

FACP typeConnection options
Parallel connection (make)Sequential connection (on opening)
LB-07Rd must ensure current consumption> 15 mA,Rd \u003d 11 kOhm, Rok \u003d 2 kOhm, VDok \u003d KD522.
Rok \u003d 2 kOhm, VDok \u003d KD522.
RayRd = 2.4 kOhm, Rok = 2.4 kOhm, VDok = KD521A.Rd = 2.2 kOhm, Rok = 2.4 kOhm, VDok = KD521A.
PPK-2Rd = 1.2 kOhm, Rok = 3.6 kOhm, VDok = KD521A.Rd = 10.0 kOhm, Rok = 3.6 kOhm, VDok = KD521A.
BolideRd \u003d 1.5 kOhm (3.0 kOhm - to determine double drawdown),Rd \u003d 8.2 kOhm (4.7 kOhm - to determine double drawdown),
Rok \u003d 4.7 kOhm, do not install VDokRok \u003d 4.7 kOhm, do not install VDok
Yakhont-16iRd \u003d 1.8 kOhm (4.0 kOhm - to determine double drawdown),Not applicable
Rok = 8.2 kOhm, do not set VDok
WERSRd \u003d 820 Ohm (1.8 kOhm - to determine double drawdown),Rd \u003d 10 kOhm (4.7 kOhm - to determine double drawdown),
Rok = 7.5 kOhm, do not set VDokRok = 7.5 kOhm. Do not install VDoc

 

AM - indicates the presence of a product modification with an address label.

The IPR535 detector Horizont PUSK VZ is supplied with cable glands of various designs:

  • for open laying of the attached cable (index in the designation - K );
  • for laying the attached cable in the pipe G1/2 ( T-1/2 );
  • for laying the attached cable in the pipe G3/4 ( T-3/4 );
  • for connecting an armored cable ( B );
  • for connecting a cable in a metal hose RZTSH-15mm or 20mm ( KM15, KM20 ).


The IPR535 detector Horizon PUSK VZ is supplied with two cable glands, which allow the detector to be installed in an alarm loop with a round cable with a diameter of 6-10 mm.

Contacts

  • SMD Company LLC
  • 445009, Samarskay obl.,
  • Togliatty,
  • st. Novozavodskaya 2a, build. 309
  • Аккредитация URS ISO 9001
Write to us, we are online!